Max Blank Dijon floor-to-ceiling heat storage stove, 8.6 kW
Max Blank Dijon floor-to-ceiling heat storage stove with 8.6 kW on wood and 81 % efficiency. Ø150 mm flue outlet, runs without electricity. The heat storage block of 40 kg holds the heat and releases it for hours after the fire has gone out. With the pellet module (ordered separately) the same stove also burns pellets. Made to order: delivery in about 14 working days.
Read more
Technical data
- Nominal output on wood: 8.6 kW, efficiency 81 %
- With pellet module: 7.0 kW, efficiency 85 %
- Flue outlet: Ø150 mm
- Flue gas temperature at the outlet on wood: 225 °C
- Required draught: 12 to 15 Pa
- Dimensions: 35 x 146 x 35 cm (w x h x d)
- Weight: 180 kg
- Heat storage block: 40 kg
- Logs up to 25 cm
- Connection for outside combustion air: Ø100 mm
- Energy label: A+
- DIBt approval
- Runs without electricity
Versions
Choose the version above. Accessories such as flue pipes, floor plate and pellet module are listed below the product.
The Max Blank dimension drawing is in the documents.
Frequently asked questions
Which flue suits the Dijon floor-to-ceiling?
The stove has a Ø150 mm flue outlet. In an existing chimney you fit a Ø150 mm stainless steel liner; without a chimney you install a Ø150 mm insulated twin-wall stainless steel flue. Ventichim stocks both. With a flue gas temperature of 225 °C and a draught of 12 to 15 Pa, we check the flue to EN 13384-1.
Can the Dijon floor-to-ceiling burn pellets?
Yes, with the Max Blank pellet module, ordered separately. It goes into the firebox and burns pellets without electricity, at 7.0 kW.
How long is the delivery time?
We order the stove for you from Max Blank. Allow about 14 working days.
Downloads
Features
| Delivery time | about 14 working days |
| Assets | 8.6 kW |
| Type | fixed version, swivelling |