Support element ø180

Stainless steel 316L support element for the IE single-wall flue system, from Ø80 to Ø400, carrying a vertical flue from a wall fixing at the base of the run.

The support element is the starting point of a vertical flue against a facade or inside a shaft. You fix it to the wall and it takes the weight of the pipes above it. From there you build the flue upwards, with wall brackets and spacers. The element is made of 316L stainless steel and resists corrosion, high temperatures and outdoor weather. According to the product data it complies with EN 1856-1.

Choose the diameter of the pipe the element has to carry: Ø80, Ø100, Ø110, Ø125, Ø130, Ø150, Ø160, Ø180, Ø200, Ø250, Ø300, Ø350 or Ø400. The item code follows the size, from IEOL080 to IEOL400.

Where does the support element go? At the bottom of the vertical section, where the flue starts on the wall. It carries everything above it.

Which appliances is it used for? For flues of condensing boilers, pellet boilers and open fireplaces, in homes and in larger installations, in new builds and renovations.

Is one support element enough? The element takes the weight at the bottom. Higher up the facade or shaft, wall brackets and spacers hold the pipe in place. For a tall installation, ask how many support points are needed.