Smooth Bend 90° ø80 with seal
87° bend Ø80 IEGB9008 from the smooth stainless steel IEG series, single-wall 316L, drawn from one piece with a seal, to turn a flue through a right angle. You use this bend where the flue goes from horizontal to vertical, or the other way round. Because it is 87°, the horizontal run connected to it slopes slightly. The radius is compact, like a classic aluminium bend, so it takes up little space.
It fits the smooth Ø80 pipes of the series: IEG2508 of 25 cm, IEG5008 of 50 cm or IEG10008 of 1 metre.
| Feature | Value |
|---|---|
| Item code | IEGB9008 |
| Part | Smooth bend 87° |
| Diameter | Ø80 |
| Material | 316L stainless steel, single-wall |
| Wall thickness | 0.5 mm |
| Design | Drawn smooth from one piece, compact radius |
| Seal | Yes |
| Flue gas tightness | Up to 200 Pa (P1) |
| Temperature class | T200 |
Why 87° and not 90°? The horizontal run connected to it gets a slight fall by itself, so condensate runs back to the appliance.
Is the seal included? Yes, the bend has a seal.
Do I need this bend for an offset? No, for that you use two 45° bends (IEGB4508) with a piece of pipe in between.
- Stock: In stock
- Delivery time: Ordered before 3pm, delivered next day
Features
| Colour | Stainless steel matt |
| Diameter | 80 |
| Sealing | Flue gas tight 200Pa (P1) and secure connection. |
| Classification | EN1856-2 T200-P1-D-VM-L50050-O(40)M |
| Material | Stainless steel 316L |
| Suitable for | gas boilers, gas condensing boilers, pellet boilers, pellet stoves, oil condensing boilers |
| Wall thickness | 0.5mm |
| Temperature resistant | up to 200° C |