- Home
- flue gas venting system
- Cascade systems
- Concentric flue gas cascade C93X
- Concentric horizontal wall terminal PP/stainless
Concentric horizontal wall terminal PP/stainless
Concentric horizontal wall terminal with air inlet and flue outlet, for a wall penetration in Ø60/100, Ø80/125 or Ø110/160.
Application. For a horizontal outlet through the outside wall, where the boiler manual and the applicable rules allow it.
Version. Air slots all round, outlet with grille. Inside, a PPH pipe carries the flue gas; the outer pipe in white powder-coated stainless steel supplies the combustion air: air and flue gas in one line. For gas or oil condensing boilers, flue gas up to 120 °C, negative and positive pressure. Designation EN 14471: T120 H1/P1 W2 O00 LI E U0.
Which code to order? Choose the diameter of the line through the wall.
| Code | Diameter | Version |
|---|---|---|
| CONCASMT60100 | Ø60/100 | wall terminal |
| CONCASMT80125 | Ø80/125 | wall terminal |
| CONCASMT110160 | Ø110/160 | wall terminal |
Always lay horizontal lines with a fall of at least 3° towards the boiler or the drain piece, so the condensate runs back. The parts slide together with socket and seal, without glue or silicone.
Ventichim supplies the complete concentric cascade C93X, from boiler connection to terminal, to installers throughout Belgium. Unsure about the diameter or the layout? Send us your setup: we check the cascade according to EN 13384.
Features
| Diameter | 60/100, 80/125, 110/160 |
| Material | PP/stainless white |