Concentric elbow 15° PP/stainless white, cascade C93X

Concentric 15° elbow with socket for a flue cascade C93X, from Ø60/100 to Ø160/225.

Application. For every change of direction of the cascade line or of the connection to the shaft or the wall. A small angle takes up an offset or the fall with little pressure loss.

Version. Socket with seal on one end. Inside, a PPH pipe carries the flue gas; the outer pipe in white powder-coated stainless steel supplies the combustion air: air and flue gas in one line. For gas or oil condensing boilers, flue gas up to 120 °C, negative and positive pressure. Designation EN 14471: T120 H1/P1 W2 O00 LI E U0.

Which code to order? Choose the diameter of your cascade.

Always lay horizontal lines with a fall of at least 3° towards the boiler or the drain piece, so the condensate runs back. The parts slide together with socket and seal, without glue or silicone.

How many elbows may I fit? That depends on the boilers and the calculation to EN 13384: every elbow costs pressure. Send us the layout and we will check it.

Ventichim supplies the complete concentric cascade C93X, from boiler connection to terminal, to installers throughout Belgium. Unsure about the diameter or the layout? Send us your setup: we check the cascade according to EN 13384.