Concentric flue system with inner and outer pipe in PP, white, in ø60/100 and ø80/125. For type C condensing boilers.
Made for the Dutch market. In Belgium you may use this series inside an existing chimney shaft; in the boiler room itself an outer pipe in PP is usually not allowed. There, use the CF series with aluminium outer pipe.
Read more
What to order
- 87° bend on the boiler, or the test and condensate element if the boiler has no test point.
- Pipes of 25 cm, 50 cm, 1 m and 2 m; cut on the plain end.
- Bends of 87°, 45°, 30° and 15° for every direction.
- Wall or roof terminal as the outlet.
- Pipe clamps: about one per metre horizontally and per 1.5 m vertically.
- At the bottom of a vertical flue, the vertical condensate element.
Which diameter
Follow the boiler manual. Every part comes in ø60/100 (code ending in 06) and ø80/125 (code ending in 08). Log in to see your own price on every product page.
Technical data
- Inner and outer pipe in polypropylene (PP), white
- Diameter ø60/100 or ø80/125 mm
- Spigot and socket with EPDM lip seal, push-fit without clamp
- Designation T120-H1-W-2-O00-LI-E-U0: up to 120 °C, positive pressure, condensate resistant
- For room-sealed appliances (type C), such as condensing boilers
- Brand LD Flue
