One-piece flexible cable with cleaning head, for stove pipes, flues with many bends and ventilation ducts. There are no joints which can come loose in the flue.

What speed do I use?

6, 8 and 10 mm flexible cable: clockwise only, 500 rpm going in and up to 800 rpm when withdrawing. These speeds are recommended values and so not the mechanical maximum.

What should I watch with the drill?

Use a variable-speed drill with an adjustable torque limiter. Never use it on hammer setting. Start slowly and stop at once if the head gets stuck. Slow down in fragile or older chimneys. Use the higher speed only when withdrawing, when you know the flue route and the access opening.

Which cable do I choose?

10 mm (DZ300 to DZ304, 3 to 15 m) for flues and connectors of any shape. 8 mm (DZ310 to DZ312, 3 to 5 m) for stove pipes and short connectors. 6 mm (DZ320 to DZ324, 2 to 15 m) for ventilation ducts.

How does it differ from rods?

Rods click together per metre, so you choose the length. A flexible cable is one piece with a fixed length.

What do I mount it on?

A drill or cordless drill. Never use the drill on hammer setting.